Home / Repipe a house cost / Tampa, FL
Cost by city
Repipe a house cost in Tampa, FL (2026)
The short answer
Repiping a house in Tampa typically costs about $3,300 to $12,300, with PEX running roughly 30 to 40 percent below copper. The local reason it comes up so often: the median Tampa home was built around 1987, a date that straddles two failure-prone pipe eras, cast-iron drains in pre-1975 homes and polybutylene supply lines in the 1978-to-1995 window. These are our national repipe figures adjusted for local plumber wages. See how we localize a range.
Tampa repipe cost by home size and material
| Job | Typical cost | Notes |
|---|---|---|
| 2 bath, 1,200–1,800 sq ft | $3,300–$9,000 | National $4,000–$11,000 at the local wage index |
| 3 bath, ~2,000 sq ft (PEX) | $4,900–$8,200 | National $6,000–$10,000 adjusted for local wages |
| 3 bath, ~2,000 sq ft (copper) | $6,600–$12,300 | National $8,000–$15,000 adjusted for local wages |
| Drywall repair after | $800–$2,500 | National $1,000–$3,000; often quoted separately |
| City plumbing permit | scope-based | Tampa Construction Services; confirm with your contractor |
Sources: National repipe ranges (our parent page), U.S. Census ACS, median year structure built, Tampa city (table B25035, 2024 1-year). Figures are 2026 national ranges and vary by region, scope, and access.
We did not collect local repipe quotes; Tampa plumbers rarely publish a whole-house repipe price. These figures are the national cited ranges multiplied by the local wage index (0.82), which keeps them honest and consistent with the national picture. Home size, pipe material, and whether the job covers supply lines, drain lines, or both move the total significantly.
Why Tampa costs differ
A few verified local facts explain why repiping comes up here.
- Cast-iron drains at end of life. Tampa has a large share of homes from the 1950s and 1960s with original cast-iron drain lines now 50 to 70-plus years old. Cast iron corrodes from the inside out through exposure to hydrogen sulfide in drain gases, eventually collapsing or losing capacity, which is why full drain-line replacement is a documented regional service category. [source]
- Polybutylene supply lines in 1980s homes. The median Tampa home was built around 1987 (Census ACS, 2024 1-year). That number spans two pipe eras that together drive much of Tampa's replumbing work: homes built before roughly 1975 often have original cast-iron drain lines now 50 to 70 years old and corroding from the inside out; homes from the 1978 to 1995 window can still have original polybutylene supply lines, a failure-prone material that was the subject of a class-action settlement. Either era argues for an inspection before deciding between a spot repair and a full repipe. [source]
- Local plumber wages run about 18% below the national median. The Tampa metro median wage for plumbers is $52,000, versus $63,800 nationally. The labor share of a large repipe job trends lower here than in higher-wage metros. [source]
- Slab-on-grade foundations. Tampa and the surrounding Hillsborough County are built almost entirely on slab-on-grade foundations, as the high water table and sandy coastal soil make basement construction impractical. Because plumbing supply lines run under the slab, a failed line under the concrete is a recognized local repair requiring either an open-slab fix or an overhead reroute. [source]
Local facts for Tampa are cited inline above. Figures are 2026 and vary by home, scope, and access.
What moves the price
- Pipe material. PEX is typically 30 to 40 percent cheaper installed than copper, so the material choice alone can move the total by thousands of dollars.
- Supply lines, drain lines, or both. Replacing only the supply lines (polybutylene to PEX) is a different scope from replacing cast-iron drains. Many Tampa homeowners end up addressing both on an older home, which raises the total.
- Home size and access. More square footage, more bathrooms, and slab access all add pipe length and labor hours. Open walls move faster than plaster or tile.
- Cast-iron drain replacement. Pulling and replacing cast-iron drain lines under a slab adds excavation and concrete work on top of the pipe cost itself, which is why this is often done in a separate project from the supply-line repipe.
Permits and licensing in Tampa
Permit: A whole-house repipe in Tampa generally needs a city plumbing permit, a full plumbing permit and inspection are required for a whole-house repipe; fees are scope-based (labor value or fixture count) — your licensed plumber will pull the permit for the address. Tampa plumbing permits are handled through the City of Tampa Construction Services Center. Florida-licensed plumbing contractors (CFC license, issued by the Florida Construction Industry Licensing Board) are required to pull permits for any work that alters the plumbing system. Verify the current fee schedule at tampa.gov before work starts. (Tampa fee schedule)
Verify your plumber: Plumbing contractors in Tampa are licensed by the Florida Construction Industry Licensing Board (CILB), under DBPR — CFC license. Before you hire, confirm the license is current and in good standing at the board’s license-verification page. Verification is free; any site charging for it is not the board.
Compare with other Tampa jobs
If slow or backed-up drains are the trigger rather than a supply-line leak, see drain cleaning cost in Tampa. If the water heater is the real problem, see water heater replacement cost in Tampa. For the national picture, start with our whole-house repipe cost guide.
Repipe a house cost in other places we cover
Same job and the same method, with different local wages, permit rules, and pipe eras behind the number. For the national picture the local figures are built from, see our repipe a house cost guide.
Repipe a house cost in Jacksonville, FL
About $3,700 to $13,800, wage-indexed to the Jacksonville, FL metro (0.92) and cross-checked against published local price pages.
Also in FL →Repipe a house cost in Florida
About $3,300 to $12,500, wage-indexed to the Florida state median (0.83), with the state pipe-era context behind it.
Also in FL →Repipe a house cost in Las Vegas, NV
About $3,800 to $14,100, wage-indexed to the Las Vegas-Henderson-North Las Vegas, NV metro (0.94) and cross-checked against published local price pages.
See the Las Vegas range →Repipe a house cost in San Antonio, TX
About $3,600 to $13,700, wage-indexed to the San Antonio-New Braunfels, TX metro (0.91) and cross-checked against published local price pages.
See the San Antonio range →Repipe a house cost in California
About $4,600 to $17,100, wage-indexed to the California state median (1.14), with the state pipe-era context behind it.
See the California range →Every city and state we publish local figures for is listed on our plumbing cost by city and state index.
Related national cost guides
The national ranges behind the Tampa, FL figures above, and the jobs that most often come up alongside whole-house repipe.
Slab leak repair cost
Whether a spot repair under the slab makes more sense than replacing the whole supply system.
See the range →NationalBurst pipe repair cost
What a single failed line costs to fix when the rest of the pipe still has life in it.
See the range →NationalToilet installation cost
What resetting or replacing fixtures adds once the supply lines are open.
See the range →Get quotes from local pros
Angi is a national marketplace for home services. You describe the job, and plumbing contractors who work in your area contact you with their own quotes. Requesting quotes is free and you are never obliged to hire anyone.
Angi pays us a referral fee for a completed service request. The fee comes from Angi, not from you, and it does not change the cost figures on this page.
Common questions
Tampa repiping questions
How much does it cost to repipe a house in Tampa?
A whole-house repipe in Tampa typically costs about $3,300 to $12,300, with a common 2,000-square-foot home landing near $4,900 to $8,200 in PEX and $6,600 to $12,300 in copper. Drywall repair afterward often adds $800 to $2,500 and is easy to overlook. These are our national repipe figures adjusted for local plumber wages; see our methodology.
Why might a Tampa home need a repipe?
Two pipe eras account for most repipe calls in Tampa. Homes built before roughly 1975 often have original cast-iron drain lines that are now 50 to 70 years old and corroding from the inside out. Homes built between 1978 and 1995 can still have polybutylene supply lines, a failure-prone material that was the subject of a class-action settlement. The median Tampa home dates to around 1987, meaning a large share of the city’s housing stock touches one or both eras.
PEX or copper for a Tampa repipe?
PEX typically costs 30 to 40 percent less installed, is flexible enough to run through walls without as many fittings, and handles the occasional pressure surge better than rigid pipe. Copper is more rigid with a long track record. Because Tampa freeze events are extremely rare, PEX’s freeze resistance is not a significant factor here. Both are code-compliant in Tampa. Ask your plumber which suits your walls, water chemistry, and budget.
Do I need a permit to repipe a house in Tampa?
Yes. A whole-house repipe is major plumbing work that requires a permit through the City of Tampa Construction Services Center. Your licensed plumber (holding a Florida CFC license issued by the Construction Industry Licensing Board) normally pulls it. Verify the plumber’s license is current at myfloridalicense.com before work begins.
What is the difference between replacing supply lines and replacing drain lines in Tampa?
Supply lines carry pressurized water to fixtures and are typically copper, PEX, or polybutylene in Tampa homes. Drain lines carry wastewater away by gravity and were cast iron in most homes built before about 1975, switching to PVC after that. Both types fail with age, but for different reasons: polybutylene supply lines crack at fittings; cast-iron drains corrode from the inside and can collapse. A repipe quote should specify which system is being replaced.
Get a real number for your repair
Get a Tampa whole-house repipe quote.
Compare itemized quotes from independent, licensed plumbers, and make sure each states the material, whether supply lines or drains are included, the fixture count, and whether drywall repair is in scope. Free to you.
Free to you. PlumbingRepairCost connects homeowners with independent, licensed plumbers who pay us — that never changes what you pay. We are not a plumbing contractor and we do not dispatch emergency crews.
How to get an honest price
Start with the range. Use the cost tables here to learn the national range and what moves the price for your job.
Get it in writing. Ask two or three licensed plumbers for an itemized quote that separates parts from labor.
Compare like for like. Confirm the scope, warranty, and permit before you compare totals.
Every cost figure on this site is cited to current industry cost data. We do not set prices and we take no payment from you.